RV Gate Installation in Arizona Must Meet Local Building Codes for Pool Barriers

DCS Pool Barriers has a reputation for producing the highest quality gates that meet all regulation codes. I had this beautiful gate installed on my home in North Scottsdale and it fully complies with the building codes for Scottsdale. DCS Industries Installs Custom Gate

To see your codes requirements go to this website: https://www.preventdrownings.org/go/page.php?page=fence_codes

For my gate in Scottsdale the code reads: Where access gates are provided, they shall comply with the requirements of Items 1 through 3. Pedestrian access gates shall be self-closing and have a self-latching device. Where the release mechanism of the self- latching device is located less than 54 inches (1372 mm) from the bottom of the gate, (1) the release mechanism shall be located on the pool side of the barrier at least 3 inches (76 mm) below the top of the gate, and (2) the gate and barrier shall have no opening greater than 1/2 inch (12.7 mm) within 18 inches (457 mm) of the release mechanism. Pedestrian gates shall swing away from the pool. Any gates other than pedestrian access gates shall be equipped with lockable hardware or padlocks and shall remain locked at all times when not in use.

DCS Pool Barriers made sure my gate was up to code and was installed to code. Thank you DCS Pool Barriers!